replacing 03-000649-02P projector lamp details

LAMP REPLACE

Power management

This function turns Projection 03-000649-02P Lamp off when this projector detects

signal interruption and is not used for a certain period in order to

reduce power consumption and maintain Lamp-life. (This projector is

shipped with this function ON.)

Power Management function operates to turn Projection Lamp off

when input signal is interrupted and any button is not pressed over 5

minutes. This function operates as follows;

1. When any input signal is interrupted, “No signal” and counting

down display appears (for 5 minutes).

2. After counting down for 5 minutes, projector lamp and READY

indicator are turned off.

3. When READY indicator flashing, Projection 03-000649-02P Lamp can be turned

on again (Power Management mode).

In this Power Management mode, Projection Lamp is

automatically turned on when input signal connected or projector

is operated with any button on Top Control again.

CAUTION : 

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE

PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.