replacing 003-120458-01 projector lamp

Lamp Replacement

For continued safety, replace with a lamp of the same type. Do not drop the lamp or touch the

glass bulb! The glass can shatter and may cause injury.

Allow a projector to cool for at least 45 minutes before you open the lamp cover. The inside of the

projector can become very hot.

Follow these steps to replace the 003-120458-01 lamp.

Turn off the projector and unplug the AC power cord. Let the projector cool for at least 45 minutes.

Loosen the screw and open the lamp cover. Pull out the lamp by using the built in handle.

1. Turn off the projector and unplug the AC power cord. Let the projector cool for at least 45 minutes.

2. Open the filter cover.

3. Loosen the screw and open the lamp cover. Pull out the lamp by using the built in handle.

4. Replace the lamp with a new one. Make sure that the lamp is properly and fully inserted.

5. Close the lamp cover and secure the screw.

6. Close the filter cover.

7. Connect the AC power cord to the projector and turn on the projector.

CAUTION 

When the projection 003-120458-01 lamp of the projector reaches its end of life, the Lamp replacement icon appears on the

screen and LAMP REPLACE indicator lights orange. Replace the lamp with a new one promptly. The timing

when the LAMP REPLACE indicator should light is depending on the lamp mode.