5811116765-SU lamp replacement and time  

Replacing the 5811116765-SU  Lamp 

The projection lamp should be replaced when it burns out. It should only be replaced with a certified 

replacement part, which you can order from your local dealer. 

Important:

a.The projection 5811116765-SU lamp used in this product contains a small amount of mercury. 

b.Do not dispose this product with general household waste. 

c.Disposal of this product must be carried out in accordance with the regulations of your local 

authority.

Warning:

Be sure to turn off and unplug the projector at least 30 minutes before replacing the lamp. Failure to 

do so could result in a severe burn. 

Caution:

In rare cases the 5811116765-SU lamp bulb may burn out during normal operation and cause glass dust or shards 

to be discharged outward from the rear exhaust vent. 

Do not inhale or do not touch glass dust or shards. Doing so could result in injury. 

Always keep your face away from the exhaust ventso that you do not suffer from the gas and broken shards of the lamp. 

When removing the lamp from a ceiling-mounted projector, make sure that no one is under the projector. Glass fragments could fall if the lamp has been burned out.