CS.59J99.1B1 lamp usage 

Safety instructions

Lamp Information

Warning Message

When the Lamp indicator lights up red or a message appears suggesting it is time to replace

the lamp, please install a new lamp or consult your dealer. An old lamp may cause a malfunction

in the projector and in some instances the CS.59J99.1B1 lamp may break.

The Lamp indicator light and Temperature warning light will light up if the lamp becomes too

hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator

still lights up after turning the power back on, please contact your dealer.

Replacing the Lamp

Warning

To reduce the risk of electrical shock, always turn the projector off and disconnect the power

cord before changing the lamp.

To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before

replacing the CS.59J99.1B1 lamp.

To reduce the risk of injuries to fingers and damage to internal components, use caution when

removing lamp glass that has shattered into sharp pieces.

To reduce the risk of injuries to fingers and/or compromising image quality by touching the

lens, do not touch the empty lamp compartment when the lamp is removed.

This lamp contains mercury. Consult your local hazardous waste regulations to dispose of

this lamp in a proper manner.