5J.J7C05.001 lamp replacement and time

When the 5J.J7C05.001 Lamp indicatorlights up red or a message appears suggesting it is time to 

replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a 

malfunction in the projector and in some instances the lamp may explode. 

It is strongly recommended that you replace the lamp at this age. The lamp is a consumable item. 

The lamp brightness diminishes with use. This is normal lamp behavior. You can replace the lamp 

whenever you notice that the brightness level has significantly diminished

Replacing the 5J.J7C05.001  lamp

•  To reduce the risk of electrical shock, always turn the projector off and disconnect the power cord before 

changing the lamp.

•  To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before replacing the 

lamp.

•  To reduce the risk of injuries to fingers and damageto internal components, use caution when removing 

lamp glass that has shattered into sharp pieces.

•  To reduce the risk of injuries to fingers and/or compromising image quality by touching the lens, do not 

touch the empty 5J.J7C05.001 lamp compartment when the lamp is removed.

•  This lamp contains mercury. Consult your local hazardous waste regulations to dispose of this lamp in a 

proper manner.

•  To assure optimal performance from the projector,it is recommended that you purchase a qualified 

projector lamp for lamp replacement.

•  If lamp replacement is performed while the projector is suspended upside-down from the ceiling, make 

sure that no one is underneath the lamp socket to avoid any possible injury or damage to the human eyes 

caused by fractured lamp.