Replacing  lamp AJ-LDX6 tips

1. Lamp Replacement

Be careful when replacing AJ-LDX6lamp

The change interval of lamp may depend on the use environment of Projector. You

can see the used AJ-LDX6 lamp time in the CHECKING LAMP TIME section of the Menu. 

You must replace the lamp when:

 The projected image gets darker or starts to deteriorate.

 The lamp indicator is red.

 The message “Replace the lamp” appears on the screen when turning the

projector on.

- Press the POWER button on the control panel or remote control to turn off power.

- If the operation indicator LED is orange and blinking, do not disconnect the main supply until the operation indicator LED

is lit up constantly (orange).

- Allow the  lamp to cool for 1 hour before replacing it.

- Replace only with the same type lamp from an LG Electronics Service Center. Using another manufacturers lamp may

cause damage to the Projector and lamp.

- Pull out the lamp only when replacing the  lamp.

- Keep the  lamp unit out of reach of children. Keep the Lamp away from heat sources such as radiators, stoves etc.

- To reduce the risk of fire do not expose the lamp to liquids or foreign materials.

- Do not place the  lamp near any heat source.

- Make sure the new AJ-LDX6 lamp is securely tightened with screws. If not, the image may be dark or there could be an increased

risk of fire.

- Never touch the  lamp unit glass otherwise image quality may be compromised or lamp life maybe reduced.

2. Using another manufacturers lamp may cause damage to the projector or lamp.

Make sure the  lamp cover is securely fastened. If the lamp cover is not installed correctly the unit will not power on.

 Don’t turn off the projector at least in 5 minutes after activating it.

- The frequent On/Off changes may cause the  lamp function to deteriorate.

 Don’t pull out the power cord while activating the projector and the cooling fan.

- It may cause the   lamp life-span to shorten and get damaged.

 The life-span of projector may considerably depend on the use environment and treatment conditions.

 The projector uses the high pressure mercury lamp so that the serious caution is essential. The shock or abuse while using

may cause lamp to blow off with explosion.

 When you continue to use the projector after an interval of  lamp replacement, the  lamp may be blown off with explosion.