lamp BL-FP190B On / Off 

Powering On the Projector

1.  Securely connect the power cord and signal cable. When 

connected, the Power LED will turn Red.

2.  Turn on the lamp by pressing “POWER” button either on the 

top of the projector or on the remote. The Power LED will 

now turn Blue. 

The startup screen will display in approximately 10 seconds. 

The first time you use the projector, you can select your 

preferred language from quick menu after the startup screen 

displays.

3.  Turn on and connect the source that you want to display 

on the screen (computer, notebook, video player, etc). The 

projector will detect the source automatically. If not, push 

menu button and go to “OPTIONS”. 

Make sure that the “Source Lock” has been set to “Off”.

Powering off the projector

1.  Press the “POWER” button to turn off the projector BL-FP190B lamp. 

The following message will be displayed on the screen. 

Press the “POWER” button again to confirm, otherwise 

the message will disappear after 15 seconds.

When you press the “POWER” button a second time, the 

system will show the countdown timer on the screen.

2.  The cooling fans continue to operate for about 10 seconds 

for cooling cycle. When the Power LED turns Red, the 

projector has entered standby mode.

If you wish to turn the projector back on, you must wait 

until the projector has completed the cooling cycle and 

has entered standby mode. Once in standby mode, simply 

press “POWER” button to restart the projector.

3.  Disconnect the power cord from the electrical outlet and 

the projector.

4.  Do not turn on the projector immediately following a power 

off procedure.