replacing SP.8LG01GC01 projector lamp

Replacing the lamp

The projector automatically detects the lamp life. When the

lamp life is nearing the end of use, you will receive a warning

message.

When you see this message, please contact your local reseller

or service center to change the lamp as soon as possible.

Make sure the projector has been cooled down for at least 30

minutes before changing the lamp.

Lamp Replacement Procedure:

Warning- 

When the lamp is approaching the end of its lifetime, the message “Lamp Warning: Lamp

life exceeded.” will show on the screen. Please contact your local reseller or service center

to change the lamp as soon as possible.

Note:

 The screws on the lamp cover and the

lamp cannot be removed.

 The projector cannot be turned

on if the lamp cover has not been

placed back on the projector.

 Do not touch the glass area of the

lamp. Hand oil can cause the lamp to

shatter. Use a dry cloth to clean the

lamp module if it was accidentally

touched.