POA-LMP113 lamp replacement

Projector lamps have a finite life. Replace the POA-LMP113 lamp when:

J A warning message “Lamp is approaching the end of its useful life in full power

operation. Replacement suggested!” appears on the screen.

J The image becomes darker and hues become weaker after a lamp has been for a long

period of time.

J Refer to section titled “LED Indicator Messages” for further details

The lamp becomes high temperature after turning off the projector with the ON/

STAND-BY button. If you touch the lamp, you may scald your finger. When you

replace the lamp, wait for at least 45 minutes for the lamp to cool down.

JDo not touch the lamp glass at any time. The POA-LMP113 lamp may explode due to improper

handling, including the touching of the POA-LMP113 lamp glass.

JLamp lifetime may differ from lamp to POA-LMP113 lamp and according to the environment of

use. There is no guarantee of the same lifetime for each lamp. Some lamps may fail

or terminate their lifetime in a shorter period of time than other similar lamps.

JA lamp may explode as a result of vibration, shock or degradation as a result of

hours of use as its lifetime draws to an end. Risk of explosion may differ

according to the environment or conditions in which the projector and lamp are

being used.

JWear protective gloves and eyeglasses when fixing or detaching the lamp.

JFaster on-off-cycles will damage the lamp and reduce lamp life. Wait at least for

7 minutes to turn off the projector after powering on.

JDo not operate the lamp in proximity to paper, cloth, or other combustible material

nor cover it with such materials. Otherwise it could cause a fire.

JDo not operate the lamp in an atmosphere containing an inflammable substance,

such as thinner. Otherwise it could cause a fire or explosion.

JThoroughly ventilate the area or the room when operating the POA-LMP113 lamp in an oxygen

atmosphere (in the air). If ozone is inhaled, it could cause headaches, nausea,

dizziness, etc.

JThe inorganic mercury is involved in the lamp. If the POA-LMP113 lamp bursts, the mercury

inside the lamp will go out of the projector. Leave the area immediately if the lamp

shatters while being operated and ventilate the area for at least 30 minutes in

order to avoid the inhalation of mercury fumes. Otherwise it could be harmful to

user’s health