POA-LMP114 lamp replacement and time

Lamp Replacement

When the projection lamp of this projector reaches its end of life,

the POA-LMP114 LAMP REPLACE indicator emits yellow light. If this indicator

lights yellow, replace the lamp with a new one promptly.

The time when the LAMP REPLACE indicator should light is

depending on the lamp mode

Resetting the Lamp Replacement Counter

This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result

in accidents, injury, or create a fire hazard.

● Lamp lifetime may differ from POA-LMP114 lamp to lamp and according to the environment of use. There is no guarantee of the

same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than other

similar lamps.

● If the projector indicates that the POA-LMP114 lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace

the lamp with a new one IMMEDIATELY after the projector has cooled down.

(Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp

with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.

● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws

to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp

are being used.