POA-LMP133 lamp replacement and time  

When replacing the POA-LMP133 lamp, please allow unit to cool down, and follow all replacement instructions.

When you see this message, change the lamp as soon as possible. Make sure the projector has been cooled down for at 

least 45 minutes before changing the lamp.

Warning: To reduce the risk of personal injury, do not drop the lamp 

module or touch the lamp bulb. The bulb may shatter and cause 

injury if it is dropped Warning: To reduce the risk of personal injury, 

do not drop the lamp module or touch the lamp bulb. The bulb 

may shatter and cause injury if it is dropped

  POA-LMP133 Lamp life may differ from lamp to lamp and according to the environment of 

use. There is no guarantee of the same life for each lamp. Some lamps may fail or 

terminate their life in a shorter period of time than other similar lamps.

  If the projector indicates that the lamp should be replaced, i.e., if the lamp life 

warning message appears, replace the lamp with a new one IMMEDIATELY after 

the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) 

Continuous use of the lamp with showing the 

POA-LMP133 lamp life warning message may increase the risk of lamp explosion

 A Lamp may explode as a result of vibration, shock or degradation as a result of 

hours of use as its lifetime draws to an end. Risk of explosion may differ according 

to the environment or conditions in which the projector and lamp are being used.