replacing SP-LAMP-070/ SP-LAMP-029 projector lamp step

Replacing the projection SP-LAMP-070 lamp

WARNINGS:

• The projector uses a high-pressure mercury glass lamp. The lamp may fail

prematurely, or it may rupture with a popping sound if jolted, scratched, or

handled while hot. The risk of lamp failure or rupture also increases as the

lamp age increases; please replace the lamp when you see the “Replace Lamp”

message.

• To avoid burns, allow the projector to cool for at least 60 minutes before you

replace the lamp.

• Do not touch or block the projector lens with any objects as this can damage

the projector lens. Scratches, gouges and other lens damage are not covered

by the product warranty.

• Unplug the power cord before replacing the lamp.

Lamp problems:

Programmed Dimming: When enabled, Programmed Dimming enhances contrast

ratios in dark scenes and disables SP-LAMP-070 Lamp Low Power. Programmed Dimming

will impact lamp life and system noise performance. Programmed

Dimming works in conjunction with the lamp. If Lamp Low Power is enabled,

Programmed Dimming is unavailable.

Lamp Low Power: toggles between on and off. Turn it on to lower the light

output of the SP-LAMP-070 lamp. This also lowers the fan speed, making the projector quieter.