TLPLW21 lamp replacement and hours  

The product’s light source is a mercury lamp that lights at increased internal pressure. Be 

sure to fully understand the following characteristics of the lamp and handle it with extreme 

care.

The TLPLW21 lamp may burst with a loud noise due to impact or deterioration, or fail to light at the 

expiration of its life.

How long it takes before the TLPLW21 lamp bursts or the life expires may vary greatly by lamp. 

Some may burst shortly after first use.

Burst is likely to happen if the lamp is used after the replacement period has elapsed.

When the lamp bursts, the broken pieces of glass may get inside the product or be 

released outside from the openings for ventilation.

When the lamp bursts, a slight amount of mercury gas enclosed in the lamp along with 

glass dust may be released from the openings for ventilation

When the lamp is broken

If glass components, including a TLPLW21 lamp and a lens, should break, handle the broken 

pieces with care to avoid injury and contact your dealer for repair service.

In the event of lamp burst, unplug the product from the wall outlet, leave and completely 

ventilate the room. Then, thoroughly clean the area around the projector and discard 

any edible items placed in that area, as they may be contaminated.

If the lamp bursts, consult a doctor if glass dust or mercury gas gets into your eyes or is 

inhaled.

WARNING

If the projector is mounted on the ceiling, it is recommended to use your 

Toshiba dealership when the lamp has to be exchanged.

Uncovering the lamp while the projector is mounted on a ceiling may lead to a danger 

of damage from falling pieces of glass if the lamp is broken. Besides, working at high 

elevations can also be hazardous. Do not attempt to replace the lamp by yourself.

When replacing, always use lamp “TLPLW21” (sold separately).

If the lamp other than the specified one is used, it may cause a malfunction or 

damage to the unit due to the difference in the connector shape or the lamp rate