ELPLP50 lamp replacement and time  

Replacing the ELPLP50 Lamp

Lamp replacement period

It is time to replace the Lamp when:

•The message "Replace the lamp. " is displayed when you start

projecting.

A message is displayed.

•The ELPLP50 Lamp indicator flashes orange.

•The projected image gets darker or starts to deteriorate

If you continue to use the Lamp after the replacement period has passed,

the possibility that the lamp may explode increases. When the Lamp

replacement message appears, replace the Lamp with a new one as soon as

possible, even if it is still working.

•Depending on the characteristics of the Lamp and the way it has been

used, the lamp may become darkeror stop working before the lamp

warning message appears. You should always have a spare lamp unit ready

in case it is needed

How to replace the ELPLP50 Lamp

The Lamp can be replaced even when the projector is suspended from

a ceiling

Warning

•When replacing the Lamp because it has stopped illuminating, there is a

possibility that the Lamp may be broken. If replacing the Lamp of a

projector which has been installed on the ceiling, you should always

assume that the Lamp is broken, and you should stand to the side of the

Lamp cover, not underneath it. Remove the Lamp cover gently.

•Never disassemble or remodel the Lamp. If a remodeled or reassembled

Lamp is installed into the projector and used, it could cause a fire, electric

shock, or an accident.

1     After you turn off the projector's power and the

confirmation buzzer beeps twice, disconnect the power cable

2     Wait until the Lamp has cooled down, then remove the

Lamp cover

Loosen the Lamp cover fixing screw with the screwdriver supplied

with the new lamp unit or a + head screwdriver. Then slide the

Lamp cover straight forward and lift it to remove

3   Loosen the two Lamp fixing screws

4   Take out the old Lamp by pulling the handle

5   Install the new Lamp

6   Replace the Lamp cover

Resetting the Lamp Hours

The projector records how long the lamp is turned on and a message

and indicator notify you when it is time to replace the lamp. After

replacing the Lamp, make sure you reset the Lamp Hours from the

Configuration Menu

Attention

•Make sure you install the Lamp securely.  If the Lamp cover is removed,

the Lamp turns off automatically as  a safety precaution. If the Lamp or

the Lamp cover is not installed correctly, the Lamp does not turn on.

•This product includes a lamp component that contains mercury (Hg).

Please consult your local regulations regarding disposal or recycling. Do not

dispose of it with normal waste