ELPLP55 lamp replacement and hours

A mercury ELPLP55 lamp with high internal pressure is used as 

the unit’s light source.

The characteristics of the mercury lamp are:

•The intensity of the lamp decreases with use.

•When the lamp reaches the end of its life, it will no 

longer light or may break with a loud noise.

•The life of the ELPLP55 lamp may vary greatly depending on 

the individual lamp characteristics and the operating 

environment. You should always have a spare lamp 

ready in case it is needed.

•Once the ELPLP55 lamp replacement period has elapsed, the 

possibility of lamp breakage incrcases. When the 

lamp replacement message appears, replace the lamp 

with a new one as soon as possible.

•This product includes a lampcomponent that contains 

mercury (Hg). Please consult your local regulations 

regarding disposal or recycling.

Do not dispose of it with normal waste.

When replacing the lamp, open this cover and replace the lamp.

After you have replaced the unit lamp, initialize the lamp hour settings. The accumulated lamp 

operating time is cleared.

It is time to replace the lamp. Replace the lamp with a new one as soon as possible. Do not continue to 

use the lamp in this state, otherwise it may explode