VLT-XD600LP lamp replacement and time  

This projector is equipped with a lamp to project images. This lamp is a consumable. It may burn 

out or its brightness may decrease during use. In such cases, replace the lamp with a new one as

 soon as possible. Be sure to replace the lamp with a new lamp separately sold that is exclusive to this projector.

Caution:

• Do not remove the VLT-XD600LP lamp immediately after using the projector. You 

may get burned because the lamp is very hot after use.

• Before replacing the VLT-XD600LP lamp, press the POWER button to turn off the 

lamp and wait for two minutes for lamp to cool down. Unplug the 

power cord from wall outlet and wait one hour for the lamp to cool 

down completely.

• Do not remove the VLT-XD600LP lamp except for replacement. Careless handling can cause injury or fire.

• Do not touch the lamp directly. It may break and cause injury or 

burn.

• Be sure not to drop the lamp lid screw into the projector. Also be 

sure not to put metal or any flammable objects inside because it 

may cause fire or electric shock. If any objects should fall inside, 

unplug and contact your dealer.

• Install the lamp securely to prevent failure and fire.

• If the lamp should break, small glass fragments may fall out 

through the grilles and some may remain inside of the projector or 

the lamp box. When taking the lamp box out, be sure to turn over 

the projector and hold the handle of the lamp box to avoid injury 

due to the glass fragments.

• If the lamp should break, never shake the lamp box or hold it in 

front of your face after removing it. The glass fragments may fall 

out and cause injury to your eyes.

• When removing the lamp from the ceiling-mounted projector, use 

the lamp replacement attachment packed with the projector or 

option lamp to prevent glass fragments from scattering.