ELPLP76 projector lamp warning

It is time to replace the lamp when:

• The following message is displayed.

The message is displayed for 30 seconds.

• The lamp indicator flashes orange.

• The projected image gets darker or starts to deteriorate.

• We recommend that you clean the air filter whenever you replace

the lamp.

• Replace the air filter if it is discolored or if a message appears even

after cleaning the air filter.

Warning

• When replacing the lamp because it has stopped illuminating, there is a

possibility that the lamp may be broken. If replacing the lamp of a projector

which has been installed on the ceiling, you should always assume that the

lamp is cracked, and you should stand to the side of the lamp cover, not

underneath it. Remove the lamp cover gently. Be careful when removing the

lamp cover as shards of glass may fall out and could cause an injury. If any

shards of glass get into your eyes or mouth, contact your local physician

immediately.

• Never disassemble or remodel the lamp. If a modified or disassembled lamp

is installed in the projector and used, it could cause a fire, electric shock, or

an accident.

Wait until the lamp has cooled down sufficiently before removing the lamp

cover. If the lamp is still hot, burns or other injuries may result. It takes about

one hour after the power has been turned off for the lamp to be cool enough